Xinertai Hydraulic Machinery
Service Hotline:18231838823
Banner
Home > news > Content

Flip gate manufacturers-on-site device and cold bonding technology for water seal of hoist gate

Edit:Xinertai Hydraulic MachineryUpDate:2020-07-14

Flip gate manufacturers-on-site device and cold bonding technology for water seal of hoist gate


After checking the qualified gate of the hoist, the water sealing device can be carried out, and the water sealing device can be carried out according to the following methods:


(1) The water seal rubber should be delivered together with the gate. The water seal should be spread out according to the direction of the water seal seat plate, and the material should be cut according to the actual scale.


(2) After the water seal is cut, the corners and joints are usually bonded by cold bonding, and the specific requirements are carried out according to the requirements of the manufacturer. Before bonding, cut the water seal into an oblique angle of 45° according to the thickness direction, and cut it with a wooden file to smooth the hair, and clean it with 97 gasoline to keep it clean. When cold bonding, the adhesive material is applied to the cut-off part. The adhesive provided by the water seal manufacturer is usually used for comparison. The upper mold may be pressed to the regular time with a heavy object. After bonding, check whether the bonding quality is intact and there must be no cracks and If the bonding is not strong, it may be bonded from scratch.


(3) After bonding the water seal is applied to the water seal seat plate, press the water seal pressure plate according to the number, the water seal bolt hole must be punched with a special hollow drill bit, and the hole diameter is less than the bolt diameter and less than 1mm. Punch a hole and pierce a bolt. After all the bolts are penetrated, tighten them evenly, and measure the unevenness of the water seal together. The unevenness shall not exceed the standard requirement. The sealing water scale should meet the planning requirements. The water seal of the entire gate shall not be broken or damaged.

Address:Xiwang Development Zone, Jizhou District, Hengshui City, Hebei Province  电话:18231838823  MobilePhone:18231838823  E-mail:1269432504@qq.com

Mobile