Why is the chain of the cleaning machine disconnected and derailed?

After long-term operation of the chain, part of the riveting part of the chain plate is riveted, and the outer chain plate comes off causing the chain to break. In the arc transition part of the chain to the reverse side of the grid body, under heavy load, it will form a relatively large pressure on the bottom track of the reverse surface, causing the reverse track to be skewed inside and causing derailment. Derailment is caused by the deformation of the toothed rake or the unevenly distributed large pulling force dragging the chain. In particular, some toxic elements are difficult to dissolve in water and easily accumulate in organisms, causing great damage to humans. When the water body is polluted, on the one hand, it causes damage to the balance between organisms and water, and between organisms and organisms. On the other hand, some toxic substances continue to transfer and accumulate. The end of the cleaning machine endangers the health and life of human beings. Planning considerations: The long-pitch plate roller chain is the main moving part of the cleaning machine (rotary mechanical grid). Regarding the arc transition of the chain, the diameter should be increased as much as possible during planning to ensure smooth transition. Reduce the pressure on the arc track surface. For the commonly used plate roller chain with a pitch of 125, the transition radius should not be less than 350mm.