Detailed explanation of the installation process of the gate leaf of the hoist

Detailed explanation of the installation process of the gate leaf of the hoist

Time: 2019-04-19 Source: Screw hoist|Cast iron inlaid copper gate|Steel gate|Hoist manufacturer|Gate manufacturer|Hoist|Stop gate_Xinhe County Ganjiang Hydraulic Machinery Factory :70

Detailed explanation of the installation process of the gate leaf of the gate hoist

Conditions that should be met before installing the gate leaf of the gate hoist:

1. The door leaf assembly is completed, the inspection is qualified, the door slot is retested, the record is complete, and the debris and steel bars in the door slot are cleaned.

2. The gate locking device can be put into use.

3. Clean up the stacking site of door leaves and accessories. Safety fences and covers have been installed at the door slots

After the gate leaves are transported to the construction site in sections, they are assembled, and then they are hoisted into the door slot for installation. The main work content of door leaf assembly includes gate hoisting, assembly, adjustment, welding, installation of water stop, reverse wheel, running mechanism and inspection.

Before assembling, an assembly platform should be erected in the factory or near the door slot, and the platform should be laid with section steel or concrete. When setting up the platform, consider leaving a place for welding, installation of accessories and inspection and measurement.

1. The civil construction work at the installation position of the hoist should be all finished, and the bent concrete of the screw hoist and the fixed hoisting hoist reach the allowable strength of the load.

2. The transportation route leading to the hoist installation site is unblocked.

3. The hoisting equipment for hoisting the hoist has been arranged.

4. The installation position of the gate has been determined so that the hoist can be installed and positioned according to the actual position of the gate.