Safety should be the top priority during the operation of hoist
Safety should be the top priority during the operation of hoist
1. The project starting unit shall install the hoist on a flat and solid foundation with a satisfactory horizon. The fuselage and ground anchor must be firm. It is required that the core line of the gate hoist and the guide wheel shaft should be vertically aligned, and the distance between the gate hoist and the wheel shaft should generally be no less than 15 meters.
2. Before adjusting and installing, check the wire ropes, separators, brakes, guarantee ratchets, drive axles, etc., and confirm that they are safe and reliable before operation. The wire rope must be arranged neatly on the drum, and at least three turns must be kept during the operation. During operation, no one is allowed to jump over the wire rope of the gate hoist to avoid being exposed.
3. When lifting heavy objects to stay in the air, in addition to using the brake, a ratchet wheel should be used to ensure the securing. During operation, it is forbidden to leave the post on their own terms. 4. In the office, you must obey the signal of the person in charge of the command. When the signal is unknown or may cause an accident, the operation should be suspended, and the operation can be continued after the situation is clarified. If there is a sudden power failure during operation, the knife should be opened immediately and the transported objects should be put down.
Related Industry Knowledge
- The difference between hoist and hydraulic screw hoist
- Classification methods and characteristics of gate hoist products in water conservancy machinery factory industry
- The general performance and how to manage the screw hoist
- What types of gates can be made into reservoir gates according to the width of the river channel and what are the precautions?
- The working principle and introduction of road machine door integrated gate
- Maintenance and maintenance of gate hoist
- How to prevent water leakage in the gate?
- What are the reasons for the water leakage of the gate?
- Where are the cast iron square gates used and what are the advantages?
- Where is the reservoir gate generally located on the water and what are the points of attention?
- What is a hydraulic flap gate? Its working principle and product structure characteristics description
- Inspection content before hydraulic hoist test operation
- Explain how to do the debugging and maintenance of the screw hoist to be more reasonable
- What is the role of the gate in hydraulic engineering
- Why the flat steel gate is of good quality and durable?
- Do you know the description and classification of hoist hoist?
- Some brief introductions of hoist and gate