The gate hoist test should meet these conditions
The operator of the gate hoist must master the structure, performance and operation methods of the equipment, and have certain mechanical knowledge to ensure the normal operation of the machine. The following introduces which conditions should be met for gate hoist detection?
Hoist gateTesting should meet these conditions
1. The door slot structure is in good condition, and there is no foreign matter jam in the door slot.
2. There is no deformation affecting the operation of the gate as a whole.
3. The support device and hinge device of the gate can work normally.
4. The hoist hoist and the gate are connected reliably. The wire rope of the hoist hoist (including the gate hoist and the trolley hoist, the same below) is wound on the drum and pulley correctly, and the rope end is firmly fixed. The wire rope must Safe and reliable.
5. The double lifting point gate should meet the synchronization requirements.
6. There are no debris on both sides of the track in the full stroke range of the mobile hoist, and the brake action is correct and reliable.
7. All mechanical parts, connecting devices, lubricating system electrical equipment and control system of the gate hoist can work normally.
Related Industry Knowledge
- The difference between hoist and hydraulic screw hoist
- Classification methods and characteristics of gate hoist products in water conservancy machinery factory industry
- The general performance and how to manage the screw hoist
- What types of gates can be made into reservoir gates according to the width of the river channel and what are the precautions?
- The working principle and introduction of road machine door integrated gate
- Maintenance and maintenance of gate hoist
- How to prevent water leakage in the gate?
- What are the reasons for the water leakage of the gate?
- Where are the cast iron square gates used and what are the advantages?
- Where is the reservoir gate generally located on the water and what are the points of attention?
- Classification method of water conservancy hoist gate products in the water conservancy machinery factory industry
- Working principle and maintenance of steel gate
- The role and efficacy of the cleaner
- Analyze the working procedure of the mobile grab grille decontamination machine
- How to install the steel gate leaf?
- Precautions for the use of hydraulic system of hydraulic flap gate
- Causes and treatment methods of screw hoist accidents
- Is the anticorrosion treatment of cast iron gates necessary?
- Lubrication requirements for the copper sleeve of the connecting shaft of the winch hoist
- Lubrication of gate hoist is a very important job