Xinertai Hydraulic Machinery
Service Hotline:
Hydraulic horizontal arc gate
Hydraulic horizontal arc gate

According to related introduction, the automatic control cast iron gate is mainly composed of two parts: the gate frame and the gate. cast ironSteel gateThe sluice frame is the supporting member of the sluice and also the running slide of the sluice. It is fixed in the second-stage concrete of the sluice pier and the sluice bottom plate by anchor bolts to safely transfer all the water pressure received by the sluice to the gate. Room.

It is understood that, in order to save materials scientifically and rationally and reduce its own weight, the section of the cast iron gate is made into a lattice type, and the size of the section is comprehensively considered according to the load and the operating conditions of the gate. The gate is a movable water-retaining member used to close and open the orifice. A cast iron frame beam is set around the surface of the gate. In order to improve the strength of the gate, the surface of the gate is made into an arch shape. The central angle of the arch is designed to be 60 degrees to reduce The water pressure on it.

In order to facilitate the manufacture, transportation and installation of cast iron gates, the gate can be made into upper and lower parts, and then bolted to connect the whole body after reaching the installation site. The upper and lower plates of the connection are equipped with flanges and ribs to make them the middle beam of the gate. In order to improve the longitudinal rigidity of the gate, longitudinal ribs are arranged in the width direction to improve the lateral rigidity, and together they play the effect of longitudinal beams.

Address:Xiwang Development Zone, Jizhou District, Hengshui City, Hebei Province  电话:  MobilePhone:  E-mail: