Xinertai Hydraulic Machinery
Service Hotline:18231838823
Banner
Adjustable two-way cast iron gate
Adjustable two-way cast iron gate

Since the gate is operated underwater, opening and closing equipment is installed under the water for convenient operation. Because the gate elevation is not consistent, the length of the drive screw and the setting of the shaft guide depends on its detailed size. The lifting lugs, lifting blocks and pin shafts are mainly used to connect the drive screw and the door body, so that the power for the door body to reciprocate up and down comes from the hoist.

During operation, the handwheel of rolling hoist (electricHoistJust flip the power switch button of the control box) to make the nut or screw worm gear rotate, drive the drive screw to work, so that the door body can reciprocate up and down relative to the door frame. At the same time, the wedge equipment uses the principle of tightening and loosening the wedge. When the door body is lowered to limit the limit position, the door frame and the sealing seat surface of the door body can be effectively fitted to cut off the water.

When the door is fully opened up, the water is dredged; otherwise, it is cut off. If the water level needs to be adjusted due to the operation, it can also be half-opened and half-closed to achieve the purpose of dredging, closing and adjusting the water level.

Address:Xiwang Development Zone, Jizhou District, Hengshui City, Hebei Province  电话:18231838823  MobilePhone:18231838823  E-mail:1269432504@qq.com

Mobile